How can we operate the security inspection machine correctly?
Home » News » Company News » How can we operate the security inspection machine correctly?

How can we operate the security inspection machine correctly?

Views: 3     Author: Site Editor     Publish Time: 2022-05-06      Origin: Site

fcc5a54889ed0146acccdd72f70fba5

There are currently many types of security inspection machines on the market, and there are different types of security inspection machines. With the development of time, I do not know what new functions the current safety control machines have developed and which industries are used in more specific areas. Let's take a look at this downstairs.

How can we operate the security inspection machine correctly?

What is the normal maintenance of the security inspection machine?

What's the contraband in the security inspection machine?

How can we operate the security inspection machine correctly?

Only appropriately trained personnel should install and use security control devices. Radiation protection regulations must be strictly followed at all times to avoid radiation damage.

1) Only appropriately trained personnel should install and use the security inspection machine.

2) Only technicians may remove the cover or protective parts during maintenance.

3) Do not use X-ray safety inspection equipment outdoors.

4) The security inspection machine must operate under the specified operating voltage. Before using the device, the voltage used must be checked.

5) The security inspection machine shall be well grounded. Equipment sockets used at the installation site must have an earthing connection.

6) If the voltage fluctuation exceeds the specified range, it is recommended to use an AC voltage stabilizer.

What is the normal maintenance of the security inspection machine?

The security inspection machine should be checked regularly and adjusted accordingly. Maintenance must be carried out by personnel approved by the equipment manufacturer after appropriate training. During the hardware maintenance process of the device, it must be performed after the power is switched off.

normal maintenance work

The security inspection machine should be installed in a ventilated, dust-free and dry environment, avoiding high temperatures, humidity and direct sunlight.

During maintenance, dust off the device first and use a brush and vacuum cleaner to remove the dust.

If security inspection machine turns out that the components or clamps are loose, they should be tightened immediately.

If components are corroded, replace them if necessary.

If components are damaged, the cause should be determined and the new components replaced after troubleshooting. After replacing the device, the relevant parameters must be adjusted before they can be used normally.

Do not allow foreign objects or liquids to enter the device during maintenance to avoid leaks or accidents.

What's the contraband in the security inspection machine?

Smuggled goods are commonly referred to as "three products", they are flammable and explosive materials, corrosive substances, controlled knives and firearms.

Flammable and explosive materials include gasoline, alcohol, fireworks, detonators, explosives, butane gas, cosmetics, air fresheners, etc.

Corrosive substances include sulfuric acid, hydrochloric acid, hydrogen peroxide, strongly oxidizing materials, etc.

Controlled knives and firearms include shift knives, jump knives, triangular knives, machetes, fruit knives, scissors, pistols, etc.

For more information about security inspection machines, please contact Shanghai Eastimage Equipment Co., Ltd, which is committed to providing the increase of security inspection machine and making it more effective, reliable and consistent.


Related Products

content is empty!

TEL
     TEL : +86-21-33909331
FAX
     FAX : +86-21-50312717
EMAIL
     EMAIL : sales@eastimage.com.cn

Home

Copyright © 2019 Shanghai Eastimage Equipment Co., Ltd. All rights reserved. Site Map.