EI-141N Turnstile+Temperature measurement recognition system

Product Instruction

The intelligent three-roller turnstile is mainly a high-tech product for intelligent management of personnel passages. This product is mainly used for outdoor environment and pure pedestrian passage management. The device organically integrates mechanical, electronic, microprocessor control and various identification technologies, and is convenient to be compatible with the use of card reader identification devices such as IC cards, ID cards, barcode cards, fingerprints, etc., through the selection of various identification System equipment and the use of reliable safety protection devices, alarm devices, direction indicators, etc., coordinate to achieve intelligent control and management of the channel, etc.

* Smart face recognition

* Infrared temperature measurement

* Visitor management

* Staff attendance

* Real touch, face capture camera

* Face recognition terminal Visitor recognition terminal * Face comparative analysis

Technology Features

1. With fault self-checking and alarm prompt function, it is convenient for users to maintain and use.

2. Through the built-in small button on the main control board, you can view the operating status of the set device.

3. Anti-surge function, when the gate opening signal is not received, the brake sticks are automatically locked.

4. It has an automatic reset function. After the gate is opened, the system will automatically cancel the pedestrian's permission to pass within the specified time. The reset time is adjustable from 1S to 60S (the system default time is 10S). After the power is off, the aisle roller falls (in accordance with fire protection requirements).

5. It can be connected with various system equipments such as access control system, consumer system, electronic ticket system, biometric system, electrostatic tester and so on.

6. The entry and exit of personnel can be controlled unidirectional / bidirectional

General Specification

1. Chassis material..............................Standard SUS304 stainless steel, top cover 1.2mm, body 1.0mm;

2. Dimensions......................................1200 length * 280 width * 980 height (MM);

3. Rod length.......................................500MM;

4. Turning of the gate..........................unidirectional / bidirectional;

5. Opening and closing time................1 second;

6. Passing speed ................................40 people/minute (normally open), ≤30 people/minute (normally closed);

7. Enter the pass state after power-on:3 seconds;

8. Service life......................................5 million times;

9. Communication interface...............standard RS485 interface, distance ≤1200 meters;

Temperature measurement face recognition

1. Non-contact forehead medical-grade temperature measurement (temperature measurement distance

0.3cm—0.6cm)

2. Capacitive touch screen management

3. Local storage of 20,000 face libraries

4. HiSilicon processor (DV300)

5. Optional health QR code recognition

6. Optional WIFI, 4G, swiping card (IC+ID), ID card reader, advertising player (picture + video)